#MAS EPOXY UK FULL#

Higher temperatures will accelerate the epoxy curing process, resulting in discolouration, shrinkage and/or cracking. Temperature Range: 65-80☏.ĭO NOT pour epoxy in conditions over 80 deg F. For best results, let the first pour cure, lightly sand the surface and wipe clean before applying the next layer of epoxy. ALWAYS allow the previous pour to cool past the peak exotherm before step pouring, adding additional material over the top. If you have any questions or concerns about the process please give us a call or send us an email at Maximum Pour Depth: We recommend pouring to a maximum thickness of 1-2 inches.įor larger voids and thicker pours, we recommend step pouring 1 in. Pouring too much epoxy into a large area may result in shrinking, yellowing or cracking. Please take into consideration the volume of epoxy you pour into a void. PLEASE NOTE: This is an advanced epoxy resin system. It cures within 24-36 hours at 70 degrees F creating a clear, glass-like finish that resists scratching and yellowing with an extended gel time to minimize exotherm and improved air release. MAS Penetrating Epoxy Sealer works great for sealing the wood to reduce the risk of air bubbles and foam appearing while curing.MAS Deep Pour Epoxy Casting Resin System is a 100% solid, two-component, three to one by volume mix ratio formulated for deep pour casting, encapsulating and moulding applications.

We recommend sealing any wood or porous surfaces prior to using Deep Pour Epoxy. When casting materials like wood, leaves, rocks and other substrates, make sure the material is dry and sealed. To learn more about exothermic reactions click here. Please visit the online FAQ before starting your project. Exothermic Reaction:ĬAUTION EXOTHERMIC REACTION: Mixed epoxy generates heat. Step pour multiple layers for thicker castings.

#MAS EPOXY UK FULL#

Every project is unique, but as a general guideline do not exceed 0.5” casting thickness for a full mixed 1.3 gallon kit, or 1” for a half mixed kit. Larger slabs should be poured thinner than smaller castings to minimize exotherm. Max casting thickness can vary depending on a number of factors including shop temp, material temp, mixing quantity, mold material, project dimensions, etc. Working in a shop or with material above 75F, Deep Pour may set too quickly and exotherm (become too hot) which could cause it to yellow, distort, shrink or crack. Epoxy is a temperature sensitive material. If you have any questions or concerns about the process please give us a call at 8 or send us an email at Conditions:įor best results, all materials and working conditions should be maintained at a constant 60F-75F. Keeping the work area cool by adding a fan can help reduce the risk of the epoxy overheating. DO NOT use Deep Pour resin in working temperatures above 75☏. PLEASE NOTE: This is an advanced deep pour epoxy resin system. If you are creating an ocean or river table MAS Deep Pour is the original and best deep pour epoxy resin! It is a slow cure epoxy resin which will cure within 24-36 hours at 70F degrees creating a clear, glass like finish that resists scratching and yellowing with an extended gel time to minimize exotherm and improved air release. Original MAS Deep Pour features a 100% solid, three to one by volume mix ratio formulated for deep pour casting, encapsulating and molding applications. Great for casting, encapsulating and molding project applications. MAS Deep Pour Epoxy Resin System is the best epoxy for deep pours between 1/2 - 1 inch thick per layer.

Step pour multiple layers for thicker castings.

1' thinkness max for 1/2 gallon pour or.

Mas epoxy uk